Products • All-in-One

All-in-One device that offers combined sample extraction and PCR amplification.

The device has a small footprint and it offers short time-to-results. Faster and more affordable PCR tests are now possible!

Order Now

POINT-OF-CARE

Integrated sample extraction and real-time qPCR amplification
Works with preloaded cartridges: less hands-on ime!

EXTREMELY FAST

Incredibly rapid extraction and thermal cycling.
Full RT-qPCR test (inc. extraction) in less than 45 minutes

OPERATIONAL PRODUCTIVITY

Several PCR tests can be executed on a single platform (RT-qPCR, qPCR, LAMP) and each cartridge can simultaneously test for multiple diseases

diaxxoCare

General Information:

No more cold chain

The PCR reagents can be preloaded and stored dry for long periods onto our PCR cartridges, therefore we eliminate the need for a cold chain. This also drastically reduces the amount of pipetting steps and therefore increases the reproducibility of the tests.

Cost-effective

Thanks to the reduced quantity of reagents, the users can benefit from lower reaction costs. As a result of the smaller size of our reaction chambers, we can successfully perform RT-qPCR with a low amount of reaction mix and therefore generate cost savings.

Incredible heating & cooling rates

Our system can achieve exceptionally high heating and cooling rates thanks to the low-thermal-mass sample holder combined with our innovative thermal cycler. As the sample is directly in contact with the aluminum holder, the heat transfer from the heating element to the sample happens in a very short time (as opposed to conventional instruments where the sample is contained in plastic tubes placed in bulky thermal diffusive blocks). We can perform a 42-cycles amplification program in as little as 15 minutes.

Extractor

Workflow:

1

Load the extraction cartridge, the tips and the diaxxoPod into diaxxoCare's tray.

2

Close diaxxoCare's door.

3

Select and run the experiment. You will recieve the result in less than an hour directly on the machine.

diaxxoCare

Specifications:

Physical

  • Base: 50×50 cm
  • Height: 45 cm
  • Weight: 10 kg

Thermal

  • Accuracy: +/- 0.5°C
  • Uniformity: +/- 0.2°C
  • Ramp rates: > 10°C/s
  • Range: 30-99°C

Optical

  • Detectors: CCD sensor
  • Excitation source: High power LED
  • Channels: Green (Ex.: 465nm, Em.: 510nm)
  • Acquisition time: 3s

Cartridges

  • Extraction cartridge: diaxxo’s extraction cartridge
  • PCR cartridge: diaxxoPod
  • Sample volume: 200 µL

Operating Environment

  • Temperature: 18-35 °C
  • Relative Humidity: 20-80%

Small, fast and affordable.

Order Now

Covid Variants

diaxxoPod (RUO)

Description

Our in-vitro diagnostic test cartridge based on rapid Polymerase Chain Reaction (PCR) amplification technology. This cartridge can reliably detect and distinguish the mutants from UK (20I/501Y.V1, B.1.1.7 – VOC-202012/01) as well as the South African mutation (B.1.351 lineage).

The test cartridge is aimed to improve the public health situation by rapidly enabling the detection of variants of concern. The cartridge is designed for qualitative detection of variants of interest of the SARS-CoV-2 Viral RNA in saliva samples and it works in conjuction with diaxxoPCR.

Specs

  • Fully preloaded and only require addition of purified sample
  • Results in approx. 30 minutes

Workflow

The test cartridges are sold with all the necessary reagents pre-loaded in the reaction wells. The use of the test cartridges is therefore extremely simple:

  • Apply the sample (viral RNA)
  • Apply water in the control wells and the cover fluid
  • Insert the cartrdige in diaxxoPCR, press a button, drink a coffee and check your results.

Notes & Instructions

  • The cartridges are supplied in a vacuum-sealed bag in order to ensure a long shelf life at room temperature.
  • Detailed instructions about how to use the cartridges and the devices are provided

SARS-CoV-2

diaxxoPod

Description

This SARS-CoV-2 cartridge is based on the US Centers for Disease Control and Prevention (CDC) RT-PCR test for 2019-nCoV. The assay detects 2 parts of the N gene specific for Sars-CoV-2. In addition, an extraction control for Human RNAse P is also included. The cartridge is designed to work in combination with saliva samples and in conjuction with our diaxxoPCR.

Specs

  • Functionally validated and confirmed template-free to cycle 45 by NTC testing
  •  Fully preloaded and only require addition of purified DNA/RNA
  • Results within 30 minutes

Workflow

The test cartridges are sold with all the necessary reagents pre-loaded in the reaction wells. The use of the test cartridges is therefore extremely simple:

  • Apply the sample (viral RNA)
  • Apply water in the control wells and the cover fluid
  • Insert the cartrdige in diaxxoPCR, press a button, drink a coffee and check your results.

Notes & Instructions

  • The cartridges are supplied in a vacuum-sealed bag in order to ensure a long shelf life at room temperature.
  • Detailed instructions about how to use the cartridges and the devices are provided

Cookies

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.

Reject all
Accept all